Box Grader for Mini Track Loaders
The Level Best PC Series is a smaller version of the popular skid steer model, bringing the same high performance to the mini track loader market.
Advantages of the PC Series:
- The industry's only precision box grader accurate to 0.1" of spec
- Mix & match universal compatibility with power and guidance systems
- No daily maintenance, helping maximize profitable uptime
MADE IN USA
Accurate to within 1/10th of an inch!
Specifications
| Model | Cutting Width | Overall Width | Total Length | Weight | Valve Type | Minimum Flow Rate | Maximum Hydraulic Pressure |
|---|---|---|---|---|---|---|---|
| PC-48 | 48 in (122 cm) | 49 in (125 cm) | 52 in (132 cm) | 555 lbs (263 kg) | Danfoss MVB10 Proportional | 10 GPM (37.8 LPM) | 4060 psi (280 bar) |
| PC-60 | 60 in (152 cm) | 61 in (155 cm) | 52 in (132 cm) | 590 lbs (290 kg) | Danfoss MVB10 Proportional | 10 GPM (37.8 LPM) | 4060 psi (280 bar) |
Standard Features:
- Push design for precision grading
- Pull design to bring material back
- Stable platform for fine grading
- Oscillating front axle stabilizes operation
- Hoses with flat-face couplers
- 1-1/2" diameter sectional mast pole (qty. 2)
- Foam-filled tires
- Powder-coated finish
- Reversible cutting edge
- Convex mirror allows material visibility
Hydraulic Valve:
- Proportional Valve
- Hoses & Fittings
Compatible with:*
- Boxer
- Vermeer
- Toro
- Bobcat
- Triple E
- Ditch Witch
- Kubota
- Wacker Neuson
- CNH
*Designs and technology change frequently. Contact us to discuss your exact machine.
Are you ready for 1/10th of an inch accuracy? Contact us to get a quote.
PC Series Grader Box FAQs
Product Basics
The PC Series is designed specifically for mini track loaders and compact utility loaders. It is not intended for full-size skid steers or compact track loaders.
Like all Level Best attachments, the PC Series achieves grades within 0.1 inch — one-tenth of an inch — of specification.
The PC Series is the most compact attachment in the Level Best lineup. At 48 or 60 inch wide and under 600 lbs, it is purpose-built for smaller machines and confined work areas where the larger GB and PD Series attachments would be impractical.
The PC Series is designed, fabricated, and assembled in New Holland, Pennsylvania. Level Best is DEKRA certified as part of the ATI Group.
Specs & Models
The PC Series is available in two widths: the PC-48 at 48 inch weighing 555 lbs, and the PC-60 at 60 inch weighing 590 lbs.
The PC-48 weighs 555 lbs and the PC-60 weighs 590 lbs, making the PC Series significantly lighter than other Level Best attachments and well-matched to the lift capacity of mini track loaders.
Hydraulics & Compatibility
The PC Series requires auxiliary hydraulics on the mini track loader. Unlike the PD Series, the PC Series does not require a case drain.
No. The PC Series requires only auxiliary hydraulics. A case drain is not required, making it compatible with a broader range of mini track loaders straight from the factory.
Push-Pull Design & Stability
The PC Series is built for both pushing material forward for precision grading and pulling material back to redistribute or level. This bidirectional capability improves efficiency and reduces the number of passes needed on a job site.
Yes. The oscillating front axle stabilizes the attachment during operation, keeping the blade in consistent contact with the ground for accurate, even results across uneven terrain.
Grade Control Technology
The PC Series includes two 1-1/2 inch diameter sectional mast poles for mounting grade control receivers. The dual mast configuration supports 3D grade control technology, allowing the attachment to work with GPS and other precision positioning systems.
The PC Series uses sectional mast poles, meaning each pole is made up of interlocking sections that can be assembled to the desired height. This makes the attachment easier to transport and store, and allows the receiver height to be adjusted for different grade control setups.
Features & Design
Standard features include a push-pull frame design, oscillating front axle, dual 1-1/2 inch sectional mast poles, foam-filled tires, a reversible cutting edge, a convex mirror for material visibility, powder coat finish, and flat-face hydraulic couplers.
Yes. Foam-filled tires are standard on the PC Series, eliminating the risk of flat tires on debris-filled job sites and keeping maintenance requirements low.
The PC Series includes a reversible cutting edge that can be flipped when one side wears, extending blade service life before replacement is needed.
Use Cases
The PC Series is well-suited for precision grading, fine leveling, and material spreading in tight or access-restricted job sites where full-size skid steers and compact track loaders cannot easily maneuver.
Contact Us Form:
WARNING